-
What are the advantages of pot type rubber bearings for highway bridges
2024-11-13The pot type rubber bearings for highway bridges have the following advantages: 1.Large carrying capacity: Structural design support: The pot type rubber bearing adopts a structure composed of steel components and rubber, and the steel pelvic cavity provides a strong support frame that can withstand the huge vertical loads transmitted by the upper structure of the bridge. Compared with othe
-
What are the characteristics of pot type rubber bearings for highway bridges
2024-11-06The pot type rubber bearings for highway bridges have the following characteristics: 1.Large carrying capacity: The structural design of pot type rubber bearings enables them to withstand large vertical loads and meet the bearing requirements of large highway bridges. Through the synergistic effect of steel bottom basin and internal rubber blocks, the load transmitted from the upper struct
-
What are the characteristics of modular single seam expansion device
2024-10-30The modular single seam expansion device has the following characteristics: 1、 In terms of structural design Modular design: Composed of multiple components such as center beams, edge beams, and rubber sealing strips, these components are designed with modularity and can be combined and installed according to actual needs. This design makes the installation and maintenance of the telescop
-
Installation and replacement process of basin support
2021-05-21Whether it is an urban bridge or a highway bridge, continuous box girder is a commonly used structural form. In order to solve the vertical bearing capacity, horizontal displacement and rotation, the continuous box girder is currently commonly used basin-type rubber bearings. The installation and replacement of basin rubber bearings is an important part of bridge construction and maintenance, whic
-
What are the functions and applications of rubber bearings?
2021-05-21The rubber bearing refers to the supporting component used to support the weight of the container or equipment and fix it in a certain position. The rubber bearing also bears the vibration and seismic load during operation. The plate rubber bearing is composed of multiple layers of natural rubber and more than two layers. Thin steel plates of the same thickness are inlaid and bonded and vulcanized
-
Bridge expansion joint application
2021-05-21Bridge expansion joints: In order to meet the requirements of bridge deck deformation, expansion joints are usually set between two beam ends, between beam ends and abutments or at the hinged position of the bridge. Expansion joints are required to be parallel and perpendicular to the bridge axis. It can expand and contract freely in all directions, is firm and reliable, and the vehicle should run
蘇公網安備32058102002553號 
Home
Product
Wechat
Telephone